Water Powered Backup Sump Pumps 2020 Reviews

A sump pump is designed to pull water from the ground or floor effectively, and are specially constructed within a sump pit. Basements need to be equipped with this device to remove water in the event of a flood. Installation can take thousands of dollars, but the device itself could cost a lot less. There are manual and automatic options, various degrees of power, and even variations in cord length. The options available can meet just about any need. There are many models on the market, and the variety can make a decision difficult, but this list of the top 10 sump pumps on the market could make the decision a little easier, depending on how much water the user needs to take out.

10. Superior Pump 92330 1/3 HP Thermoplastic Submersible Sump Pump with Tethered Float Switch

Superior Pump 92330 1/3 HP Thermoplastic Submersible Sump Pump with Tethered Float Switch

The Superior Pump Sump Pump comes from a family-owned business that is based in Minneapolis, Minnesota. It includes heavy-duty stainless steel jacketed shaft seals and can move up to 2400 gallons in a single hour. With a one-year warranty, the product is already CSA certified and UL/CUL listed. To ensure high-capacity pumping, the sump pump includes 1-1/4 inch or 1-1/2 inch NPT discharge and have been factory tested.

9. WaterAce WA80UP Submersible Utility Pump

WaterAce WA80UP Submersible Utility Pump

The utility pump by WaterAce offers a 10-foot power cord and water-cooled motor, though monitoring is necessary for turning the pump on and off. The pump is meant for the draining of water from either sinks or tubs, though it is also manufactured to effectively drain from pools, spas, basement floors, etc. in residential areas, but it has a lowered carbon footprint as a result of the 115V permanent split capacitor. To extend the life of this pump, it is made of thermoplastic that is highly resistant to corrosion. A full user manual for the utility pump can be downloaded online.

8. Zoeller M63 Premium Series Sump Pump

Zoeller M63 Premium Series Sump Pump

The sump pump from Zoeller is made of cast iron, offering 3/10 horsepower with 1-1/2″ NPT discharge. This pump is safe to submerse, though it has a maximum discharge flow of 43 gym. However, there are no other reviews by customers and no other information available online about this sump pump.

7. Zoeller M53 Mighty-mate Submersible Sump Pump

Zoeller M53 Mighty-mate Submersible Sump Pump

The Zoeller M53 Mighty-mate Submersible Sump Pump is designed for both septic tanks and residential sump pits, providing 1.5-inch discharge for solids. The automatic model features a cast iron switch case, motor, and pump housing, but it is held on a plastic base. The 9-foot power cord allows consumers to stretch as far as needed in the home.. With thermal overload to protect the oil-filled motor, the pump is fit to help with commercial wastewater issues effectively.

6. Wayne ESP25 Upgraded 12-Volt Battery Backup System

Wayne ESP25 Upgraded 12-Volt Battery Backup System

This battery backup system is created to protect homes when the power goes out, offering an upgrade to existing battery backup systems. The structure is made of epoxy coated steel and cast iron. With a thermoplastic battery box that is corrosion resistant, all of the charging controls and battery is protected.
Though this backup system is not actually a sump pump, it offers 2900 GPH at 0′ for additional protection to a sump pump. It is meant for use with the Wayne Wsb1275 75 amp hour battery.

5. WAYNE CDU800 1/2 HP Submersible Cast Iron and Steel Sump Pump

WAYNE CDU800 1/2 HP Submersible Cast Iron and Steel Sump Pump

The sump pump from WAYNE is made to accommodate sump basins of at least 11-inch diameters. With reinforced polycarbonate impellers and top suction design, this sump pump is meant to drastically reduce clogging. It is easy to install and offers a handle to carry the device with greater ease. The submersible pump involves a two-pole switch to stop basements flooding, and the automatic overload, combined with 115-volt conductors, will prevent it from being damaged as a result of lightning. No oiling is needed to support the lubricated ball bearings, and an 8-foot extension allows the waterproof grounding wire to reach any outlet. With a three-year warranty, consumers will see a maximum flow rate of 51 gallons per hour.

4. Wayne 57729-WYN1 EEAUP250 Electric Water Removal Pump

Wayne 57729-WYN1 EEAUP250 1/4 HP Automatic ON/OFF Electric Water Removal Pump

This electric water removal pump is designed to be left unattended to allow consumers to remove water without having to supervise the sump pump. This design is optimal for consumers with crawl spaces, window wells, and other problematic areas that would otherwise accumulate far too much water. Though malfunctioning may occur, clearing a vent hole or decontaminating switch housing is easily fixed. The device is made of reinforced sealed thermoplastic for full submersion. The water-powered backup sump pump is capable of reaching a flow rate of 3,000 gallons per hour, though water levels much reach at least 1.75 inches in depth for operation. Below this level, water will not be pumped. This package also includes a garden hose adapter.

3. WAYNE CDU980E 3/4 HP Submersible Cast Iron with Integrated Vertical Float Switch

WAYNE CDU980E 3/4 HP Submersible Cast Iron and Stainless Steel Sump Pump with Integrated Vertical Float Switch

The WAYNE sump pump is designed for an 11-inch diameter or larger sump basic, reinforced with a polycarbonate impeller. The top suction design prevents clogging with its filtration system, and overheating is prevented through a thermally protected motor. Made of epoxy coated steel, the flow rate of this pump can reach up to 4,600 gallons per hour, offering 3,500 gph at 10 ft. of discharge lift.
Protected with a five-year warranty, the sump pump is easy to install and handle for the best performance possible. It also includes a handle to move the water-powered backup sump pump easier to carry from one place to the next. However, it is only designed for indoor use.

2. WAYNE WWB WaterBUG Submersible Pump with Multi-Flo Technology

WAYNE WWB WaterBUG Submersible Pump with Multi-Flo Technology

The WAYNE submersible pump is designed to work for tight areas to remove water, including laundry tubs, bathtubs, buckets, and more. Consumers can use it for either top or side discharge with the 30-foot max head and will be able to remove down to 1/16 of an inch. With the multi-ring suction strainer, consumers will be able to effectively drain debris and reduce the risk of clogging. When water isn’t being moved, the pump needs to be unplugged to avoid running dry. The max flow rate of this sump pump is 1,257 gallons, offering outlets with corrosion-resistant brass to fit absolutely any garden hose. The WaterBUG can even reduce standing water yards, which means that users will be less likely to deal with mosquitos and other bugs attracted to water.

1. Superior Pump 91330 1/3 HP Thermoplastic Submersible Utility Pump with 10-Foot Cord

Superior Pump 91330 1/3 HP Thermoplastic Submersible Utility Pump with 10-Foot Cord

Superior Pump is known for offering pumps that are meant to withstand consistent use, as the submersible utility pump is equipped with solid copper motor windings. The 10-foot cord allows the sump pump to be positioned nearly anywhere with consistent energy. The thermoplastic construction is strong enough to last and has been 100% tested. The ¾-inch garden hose adapter is capable of moving up to 2,400 gallons per hour, though the suction screen prevents large debris from clogging up the hose. However, it is still capable of handling up to 1/8-inch solid pieces with no difficulty and can fit a standard 6-inch floor drain. The drain is supported with a 1-year warranty.

Leave a Reply

This site uses Akismet to reduce spam. Learn how your comment data is processed.